Home Styles 4509-95 - Manual (Page 2)

B
D
H
I
I
D
Assembly Instructions 2/5
STEP 1
IMPORTANT
Do not tighten up all the screws until each part is properly assembled.
You should keep Hex Wrench in the safe place as you may need to
tighten up the Head Cap Bolts in the future.
Attach Back Piece (D) to
Side Panel (B) at the lower
position with Head Cap Bolts.
Attach Back Piece (H) to
Back Piece (D), then slide
Back Panel (I) into place.
Attach Back Piece (D) to
the unit at upper position.
Tighten the Head Cap Bolts.
STEP 2
Attach Front Piece (E) and (G)
to the unit with Head Cap Bolts.
Attach Front Piece (F) to the
unit.
Attach Base (J) to the unit
with Head Cap Bolts (long)
and Cross Dowels.
Head Cap Bolt
Head Cap Bolt
Head Cap Bolt
Head Cap Bolt (long)
Cross Dowel
E
F
G
J
Upper Position
Lower Position