Home Styles 5040-95 - Manual (Page 4)

(Fig)1
MAKE SURE ROLLER
IS ON THE BACK
L3
L4 L1
(Fig) 1
Line up Side Parts (L3) and (L4) to the
Front Part (L1). Be sure to follow the
Arrow sign
sticker on the parts. Using a Philips screw driver,
insert 1 ” screws ( II ) into each of the 4 pre-drilled
holes in sides (L3) and (L4), then tighten half way.
Assembly Instructions 4/4
Drawer
L5
Unit Part List
L3.
Side Part(L)
1 pc.
L4.
Side Part(R)
1 pc.
L5.
Bottom Part
1 pc.
(Fig) 2
(Fig) 3
(Fig) 4
Assemble the Pull Handle
with Machine Screw on
the Front Part (L1).
(Fig)2
(Fig)3
(Fig)4
Turn the assembled drawer over and slide the
Plywood Bottom Part (L5) into the grooves
on Side Parts (L1), (L3) and (L4). Be sure to push
the plywood all the way forward so it meets the
Front Part (L1).
Attach the Back Part (L2) to the assembled drawer. Using a
Philips screw driver, insert 1” screws ( II ) into each of the 4
pre-drilled holes in sides (L3) and (L4), then tighten all
screws.
L5
L3
L1
L4
L2
L2.
Back Part
1 pc.
L1.
Front Part
1 pc.
* If you are missing any of these
parts, please contact our DMI
Customer Service Department
at 1-877-831-0319 or fax us at
1-800-755-2878.