Home Styles 5660-30 - Manual (Page 2)

Assembly Instructions 2/4
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Use a soft cloth between these parts and the floor.
STEP 1
Attach Stretcher (N) to Stretcher (O),
with Wood Screws (Short).
STEP 2
Attach Leg Supports (E) and (F) to Legs (I)
and (J) with Assembly Screws.
Attach Rail (L) to Leg Supports (E) and (F).
Attach unit from Step 1 to Legs (I) and (J) with
Head Cap Bolts (Middle).
IMPORTANT
I
Wood Screw (Short)
Head Cap Bolt (Middle)
O
J
F
E
L
J
I
Head Cap Bolt (Middle)
STEP 3
Attach Blocks (D) to Pipe (M).
Attach Pipe into the pre-drilled holes of
Supports (G) and (H).
Attach Supports (K) to Supports (G) and (H)
with Head Cap Bolts (Middle).
Assembly Screw
K H
D
M
K G
N