Home Styles 5552-30 - Manual (Page 2)

Assembly Instructions
STEP 1
STEP 2
STEP 3
STEP 4
Figure 1
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Key Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
Place Top (A)
upside down on a soft cloth.
Insert all Bolts into
the pre-drilled holes of Top (A).
Attach 2 adjacent Legs
(B) to Top (A) with Bolts, Flat Washers,
Spring Washers, and Nuts.
(See figure 1)
Tighten all Nuts, only ,
with Key Wrench.
Attach Stretcher (C) to unit with
Flat Washers, Spring Washers
and Nuts, tighten .
half way
half way
Attach 2X Legs (B) to unit with Flat Washers,
Spring Washers and Nuts.
Tighten all Nuts completely with Key Wrench.
Cover all Nuts with Nut Caps.
Turn the table to its’ upright position.
To level the table, adjust the adjustable
levelers on the bottom of legs.
(See figure 2)
B
B
B
B
C
A
Flat Washer
Spring Washer
Nut
Nut Cap
Nut Cap
Nut
Spring Washer
Flat Washer
Bolt
Figure 2