Clickfree C2N - Manual (Page 68)

Clickfree C2N Home Backup Drive User Guide Advanced Topics (HD)
Warning:
While a software update is taking place it is very important for you not to
remove the Clickfree C2N Home Backup Drive from your computer and not to
turn off or restart the computer until the update is complete.
3. When the software update is complete, you must unplug the Clickfree C2N Home
Backup Drive and plug it in again for the update to take effect.
M ASTER R ESET
Master Reset is used to remove all backed-up content from all computers that have been
backed up on your C2N Home Backup Drive, and to apply factory settings – see “What
are ‘factory settings’ and how do I use them?” on page 61.
After you perform a Master Reset you can no longer restore any previously backed-up
content. However, your C2N Home Backup Drive can still be used for new backups.
Note:
Clickfree never erases anything other than the backups it has performed.
If you want to remove only the content that was backed up from one computer, see “To
remove a computer” on page 61.
♦ To remove all backed up content:
1. On the Tools screen click Master Reset .
2. If you really want to remove all backed-up content from Clickfree , check the
checkbox and click Reset .
Copyright © 2010 Storage Appliance Corporation. 68