CITIZEN CBM1000II - Manual (Page 91)

— 89 —
GS p n (Only for Label Model)
[Function] Selecting the paper mode
[Code] <1D>H<70>H<n>
[Range] n = 0, 1
[Outline] Selecting the paper mode.
The mode can be selected with “n” as follows:
[Caution] When “n” is “1”, it is set to the detection mode of DIP switch 2-
8.
This command only works when it is entered at the beginning
of a line.
[Default] DIP switch 2-7 OFF: n = 0
DIP switch 2-7 ON: n = 1
n Function
0 Standard thermal paper
1 Label paper (Label interval detection or Black mark detection)