M2tech, Back panel, Vaughan 384 – M2TECH Vaughan User Manual
Page 7: 32bit digital-to-analog converter, Optical digital input. optical input for toslink, Connector. 13) st, Optical digital input. optical input for st, Connector. 14) i
VAUGHAN
384
k
H
z
/32bit digital-TO-ANALOG CONVERTER
REVISION 1PrA – MAY 2012
Copyright © 2012, M2Tech Srl
7
M2Tech
www.m2tech.biz
3. Back Panel
WARNING!
ELECTRIC SHOCK HAZARD! DO NOT OPEN!
NO USER SERVICEABLE PARTS INSIDE
REFER ALL SERVICING TO QUALIFIED PERSO NNEL
!
RATING: 100-240VAC - 50/60HZ
POWER CONSUMPTION: 75VA
FUSE: 2.5A Slow BLOW
M2TECH
VAUGHAN
384 H /32bit DAC
K Z
MADE IN ITALY
S/N:
OUTPUTS
RIGHT
LEFT
INPUTS
A/L
B/R
AES/EBU
S/PDIF
TOSLINK
ST
EXT.
CLOCK
I S
2
USB 2.0
GND
HOT ( +)
COLD (-)
PUSH
PUSH
7
8
7
8
9
10
11
12 13
14 15 16
17 18
19
Figure 2
7) Balanced analog outputs. Connect to a left-right pair of balanced inputs of the
amplifier or preamplifier. XLR male connectors.
8) Single-ended analog outputs. Connect to a left-right pair of single-ended inputs of the
amplifier or preamplifier. RCA female connector.
9) AES/EBU digital inputs. Accepts AES/EBU datastreams in either professional or
consumer format. Can be configured as two stereo inputs or one dual-mono input. XLR
female connector.
10) S/PDIF BNC digital inputs. Accept S/PDIF datastreams. Can be configured as two
stereo inputs or one dual-mono input. True 75 Ohms BNC female connectors
11) S/PDIF RCA digital inputs. Accept S/PDIF datastreams. Can be configured as two
stereo inputs or one dual-mono input. RCA female connectors
12) Toslink
TM
optical digital input. Optical input for Toslink
TM
cables. Can be configured
as two stereo inputs or one dual-mono input. Toslink
TM
connector.
13) ST
TM
optical digital input. Optical input for ST
TM
cables. Can be configured as two
stereo inputs or one dual-mono input. ST
TM
connector.
14) I
2
S input. Accepts I2S audio signals. RJ45 8-pole female connector with M2Tech
proprietary pinout (see Section 12 on Page 26).
15) External clock input. Accepts both master clocks and word clocks with automatic
detection (see Section 13 on Page 26). True 75 Ohm BNC female connector.
16) USB 2.0 input. Connect to a PC or MacIntosh with an USB 2.0 compliant A-B cable.
USB 2.0 B female connector.