M2TECH Evo Supply - Manual (Page 7)

E vo
S UPPLY
LOW
NOISE
BATTERY
POWER
SUPPLY/CHARGER
REVISION
P r D
–
AUGUST
2012
Copyright © 2012, M2Tech Srl
7
M2Tec
h
www.m2tech.biz
3. Connections
Connect the plug of the wall adaptor to the supply connector (Page 6, no.1) of
E vo
S UPPLY.
Connect the Bulgin plug of each supply cable to one of the
E vo
S UPPLY output connectors
(Page 6, no.3).
Connect the 5.5/2.1mm plug of each supply cable to a 9V-operated M2Tech device. Of
course, one cable may be used when one device only needs supply; the other output will
be unused.