Magnum Dynalab MD-807T - Manual (Page 17)

- 17 -
17
You can choose the order of the DAB station list to be either Alphanumeric, Ensemble or
Valid. Ensemble lists groups of stations that are broadcast together on the same ensemble, for
example BBC or South Wales local. Valid lists valid stations first, alphanumerically, then off-
air stations.
To change station order, touch the DAB menu bar > Station order > then Alphanumeric,
Ensemble or Valid.
FM RADIO MODE
FM radio mode receives analogue radio from the FM band and displays RDS (Radio Data
System) information about the station and show (where broadcast).
To enter FM mode, press the FM icon on the Main menu until the display shows the FM
Radio playing screen.
Selecting stations
To find a station, touch the button and you can scan up or down the FM band by
pressing the “<<” or “>>” icons. The frequency display starts to run up or down as the tuner
scans the FM band and stops when it finds an FM radio station.
It can also be tuned manually by deselecting the icon and pressing the << or >> icons
.
Presets
To store an FM preset, touch the add to presets icon until the display shows the Favourite
added screen. Select one of the 10 presets to save the currently playing station.
To select a preset, touch the preset icon briefly, then select one of the listed preset stations
displayed in My Favourites.
Now playing information
While the stream is playing, the screen shows its frequency, or if RDS information is
available, station name and any further RDS information such as programme name, track
title and contact details. If no information is available, just the frequency is shown. Stereo
broadcasts are indicated with an icon at the top of the screen.
Settings
Scan settings
By default, FM scans stop at any available station. This may result in a poor signal-to-noise
ratio (hiss) from weak stations. To change the scan settings to stop only at stations with good
signal strength, change the Stop on stations value from All to Strong via the FM menu.
Audio settings
By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a
poor signal-to-noise ratio (hiss). To play weak stations in mono, touch the FM menu bar >
Force mono > Yes.
GLOSSARY
DAB- digital audio broadcasting
DLS – dynamic label segment
WPA-wi-fi protected access
WPS-wi-fi protected setup
DHCP- dynamic host configuration protocol
WLAN – wireless local area network