Magnum Dynalab MD-105T User Manual
Page 7
Advertising
- 7 -
DISPLAYS AND METERS
G. MULTI-PATH METER - This meter indicates the amount of multi-path, the
lower the reading the better.
H. SIGNAL STENGTH– This meter readout indicates the amount of signal the
tuner is receiving, the higher the better.
I. FREQUENCY DISPLAY – Displays the station via a numeric value, the
frequency that your tuner is dialed into. Display ranges from 87.5 MHz
through 108.5 MHz. This readout is controlled by the tuning knob
*model shown is the MD 105 with optional DAC upgrade
Advertising