Magnum Dynalab MD-301 - Manual (Page 12)

- - 12
SPECIFICATIONS
Power Output
Audio Frequency Response (+/-0.1dB)
Signal to Noise Ratio
Total Harmonic Distortion
Class of Operation
Input Impedance
Output Impedance after volume control
Inputs
Outputs
Input Sensitivity
Fully Balanced Amplifier Design
Safety Diagnostic System
Dynamic Headroom
Dimensions (W.D.H.)
Shipping Weight
Fuse Replacement
(located with AC plug)
Tube Specifications
Warranty (Tubes)
100 Watts into 8 Ohms, 200 Watts
into 4 Ohms
+ Zero, -0.25dB, 2Hz - 100KHz
-110dB, A-Weighted
0.05% at any power
Class A/B, Class A at 1-3 Watts
10k
2K2
4 Analog single ended including
Surround Sound Processor input
2 line level pre-out (variable and fixed)
1.2V RMS
8 Sanken Output Transistors per
channel
Continuous of all Voltages and Current
+3.0 Db
173/4 " x 20" X 6.5"
45 lbs
120V, 4 amp slow blow OR 240V,
4 amp slow blow
1- EC 83
1 year