Crestron electronic htt-b10x - Manual (Page 19)

Crestron HTT-B10X infiNET™ TableTop Controller
C2Net Device, Slot 9
• Additional HTT-B10X devices are assigned different MNET ID numbers as
they are added.
• If necessary, double click a device to open the “Device Settings” window
and change the MNET ID, as shown in the figure below.
“HTT-B10X Device Settings” Window
• The ID code specified in the SIMPL Windows program must match the
MNET ID of each unit. Refer to “Identity Code” on page 8.
Program Manager Program Manager is the view where programmers “program” a Crestron control
system by assigning signals to symbols.
The symbol can be viewed by double clicking on the icon or dragging it into Detail
View. Each signal in the symbol is described in the SIMPL Windows help file (F1).
Standard Button Arrangement
Refer to the illustration on page 10 for the standard arrangement of buttons and
feedback LEDs on the keypad.
Example Program
An example program for the HTT-B10X is available from the Crestron website
(
www.crestron.com/exampleprograms ).
Operations Guide – DOC. 6583B infiNET™ TableTop Controller: HTT-B10X • 15