Metalfab Loss of Weight- Scale System - Manual (Page 5)

LOSS-OF-WEIGHT _ Systems
Installation and Operating Instructions
Metalfab, Inc. Vernon, NJ 07462 Phone (973)764-2000 Fax (973)764-0272 [email protected]
5
Flexible Sleeve
Aside from checking the clamp tightness, there
is no maintenance required on the sleeve.
Periodic visual checks should be made to see if
there is damage caused by chemical attack or
mechanical damage to the elastomer.
Note: Standard sleeve is Neoprene with a
maximum temperature rating of 210°F.
Optional sleeves are NORDEL with a
maximum temperature rating of 325°F and
VITON with a maximum temperature rating of
400°F.
WARNING: Because of the elastomeric
seals required on vibrated equipment, the
Bin Activator WILL NOT CONTAIN A FIRE OR
EXPLOSION. If a fire is in the bin. THE AREA
SHOULD BE EVACUATED AND AVOIDED!
Isolators
The isolators should give years of use baring
chemical attack or severe overloading.
WHEN INQUIRING ABOUT ANY BIN ACTIVATOR,
ALWAYS REFER TO THE SERIAL NUMBER
STAMPED ON THE METALFAB NAMEPLATE.