MFuel Wall Pak 110 - Manual

USER MANUAL
T M
E N E R G Y TO R U N W I T H ™
©2005 Blackstone International, LTD. The MFUEL logo is a trademark of Blackstone
International LTD. The PAK logo is a trademark of Blackstone International, LTD. All
other brand names and logos are trademarks or registered trademarks of their
respective owners. Specifications are subject to change without notice.
Blackstone International LTD.
2018 Lord Baltimore Drive, Baltimore, Maryland, 21244 USA
Tel: 1-410-277-9370, 1-888-525-7969; Fax: 1-410-277-9338
T M
E N E R G Y TO R U N W I T H
™
H I G H / L O W P O W E R
DIGITAL POWER ADAPTER KIT
W A L L
110
Trouble Shooting Guide
In most instances, solving problems with your MFUEL PAK is simple.
If your device is not charging or operating properly, do the following:
1. Disconnect the MFUEL PAK from power source.
2. Verify that the correct Hot Tip has been installed by checking the Hot Tip
compatibility list. Low and high power Hot Tips may fit the power input on
multiple devices. Never force a Hot Tip into an electronic device.
All high power MFUEL products are marked in RED. Be sure that your high power
device such as your notebook is correctly mated to a high power Hot Tip and that it
is being powered through the high power output and cable. All low power MFUEL
products are marked in YELLOW. Be sure that your low power device such as your
cell phone is correctly mated to a low power Hot Tip and that it is being powered
through the low power output and cable.
Using low power devices with the high power output and vice versa constitutes
misuse, can damage your electronics, and voids all warranties.
3. Reconnect the adapter according to the steps in the Product Setup Guide.
Check to ensure all connections are secure.
4. Plug the correct Hot Tip into your electronic device. The device should begin
charging regardless of whether it is powered on or off.
5. If the blue power indicator LED does not light, it may be burned out or the unit
may not be connected to the power supply correctly. Disconnect all connections
and reconnect the adapter according to the steps in the Product Setup Guide.
Check to ensure all connections are secure.
6. If you are still experiencing problems, please contact MFUEL.