Native Union Curve Bluetooth - Manual (Page 4)

b. Plug the AC adaptor into a power outlet.
The white LED on the base is a charging indicator.
It will turn on when the handset is placed on the base for
charging, and turn off when it is fully charged.
When your MM03 handset has low battery, the red LED of the
handset will start blinking and it will play low battery alert tone
every minute. Place the handset back to the base to charge it.
c. Finally, place the MM03 handset in the charging base to
charge the battery*
* The MM03 comes with a build-in rechargeable battery. It takes two
or three hours to fully recharge the battery.
NOTE :
You can also use the Micro-USB/USB cable provided to connect your MM03 base directly to the
USB port of your computer to recharge the handset.
STEP 2
TURN YOUR MM03 HANDSET ON
To turn on your MM03, you must press and hold the MFB button for
2 seconds.
When your MM03 is on, you will hear a sound and the blue LED will
turn on.
STEP 3
TURN YOUR MM03 HANDSET OFF
To turn off your MM03, you must press and hold the MFB button
for 2 seconds.
When your MM03 is off, you will hear a sound and all LED will turn
off.
5 4