Cabletron Systems Network Router - Manual (Page 60)

Using the Stand-alone Launcher
4-6 Adding Devices to the Launcher Database
Adding Devices to the Launcher Database
There are two ways to add devices to the database: you can add them
one at a time via the EditÑ>Add Device menu option, or you can
perform a discover on one or more network segments (see
Using the
Discover Tool , page 4-13 , for more information on discovery). You
can also add a SmartSwitch 9000 six- or 14-slot chassis to the launcher
database, as described below.
Adding Devices Individually
The number of devices that can be added to the Launcher database is
limited only by your workstation resources; if the list box is full,
additional devices can be displayed by using the scroll bar.
To manually add a device to the Launcher Database:
1. From the Launcher menu bar, click to select Edit and drag down
to Add Device.The SPMA Launcher: Add Device window,
Figure 4-2 , will appear.
!
CAUTION
Be aware that SPMA performance is significantly reduced when over 200
devices are loaded into the database.
00-Instl_SEM-Solaris_Book Page 6 Monday, October 5, 1998 11:41 AM