Cygnett Unison i-XD - Manual (Page 5)

Dock your iPod here
Remote control receiver
iPod connector
1. USB 2. DC In 3. Audio Connection 4. S-Video
Connecting to your iPod
Connecting the dock
1. Connect the dock to your audio system or speakers using
the included 5 metre Audio (3) cable.
2. Plug the power adaptor to an AC power outlet and the other
end to the DC in jack (2) to charge your iPod.
3. For viewing video footage, connect the S-video cable to the
dock (4) and into your television. This requires an iPod with
video capabilities.
4. To sync your iPod with your computer, connect the included
USB cable from the dock (1) to your computer. Your iTunes
should automatically start after a short while and sync with
your iPod.
5. Once you have connected the cables to the rear of the dock,
slot in the appropriate insert for your iPod. Dock your iPod
on the iPod connector.
6. To take full advantage of the stereo sound, we recommend
you place the dock close to the centre of your
entertainment system and separate the speakers.
7. To adjust the volume via the dock press the (+) or (-)
buttons on the front of the dock.
3
Blue line shows cut line
do not print