Outdoor Great Room GBI-41 Built In Electric Fireplace - Manual (Page 9)

8
1. Operating by Manual Button
NOTE! The manual buttons on the fireplace unit do not operate all functions of this electric fireplace. Their
purpose is to control some basic function if the remote control is misplaced or damaged. Please use the remote
handset to carry out all functions.
FLAME HEATER
flame button
heater button main power switch
Main power switch
The POWER switch supplies power to all of the functions of the fireplace. This switch must be in the “ON” position
for any of the functions including the remote to work.
Flame button
The fire has four flame effects, by pressing the flame effect button the unit will cycle through each effect.
Heater button
Press once turns 750W heater on. (Pilot lights illuminated ●○)
Press again turns 1500W heater on (Pilot lights illuminated ●●)
Press third time turns heater off. (Pilot lights illuminated ○○)
To Reset the Heater
Your heater includes a protection system that shuts off the heater if it overheats for any reason:
1) Turn unit to off.
2) Unplug unit, wait 5 minutes.
3) Plug in and turn on.
2. Operating by Remote Control
NOTE!

In order to protect the product from becoming too hot, there is 8s delay when turning on the heater; also there
is 8s delay when turning off the heater fan.

Make sure the batteries are installed properly in the remote control.

The effective range of the remote control is up to 4 meters or 13 feet.
Battery: This remote uses 2 AAA batteries.