PDR Mounts awm175 - Manual (Page 7)

2. SECURE THE DISPLAY BRACKETS TO THE MO NITOR
NOTE: Do not over tighten the bracket mounting screws as damage to the display internal mounting threads could occur.
Fig 4
Mounting hardware C,D,E,F,H,I,J,K,
Square Multi-mount washer (L )
Panel display bottom edge
Display bracket ( A )
Optional plastic spacers ( G )
Place the display panel face down on a protected surface.
Position the bracket (A) with the slots facing towards the top
See Fig 4
Using the proper screws and the square multi-mount washers (L) supplied
Position the brackets equal distance from the bottom and top, and tighten hardware.
NOTE : In some applications the plastic spacer ( G ) and longer screws ( I, J or K ) may be required to add clearance for the back panel.
Do not over tighten hardware, damage to the display may result.
( C,D,E,or F)
7