PDR Mounts upm50 - Manual

Projector ceiling mount application fig 1
Fig 1
Projector wall mounting application fig 2
Fig 2
Model
UPM50 PROJECTOR MOUNT CEILING/WALL
To ensure the correct usage, please read and follow the instructions manual thoroughly. Please store the instructions in a safe place for future reference.
To ensure customer safety, be sure to decide the installation location so that the strength is sufficient to withstand the weight of both the projector
and the mount.
Fully tighten all of the mounting screws as specified in the instructions.
1
Special techniques are necessary for installation of the panel display mount.
Do not attempt to perform this work by yourself.
Request an installation specialist to install this unit.
Manufacturer assumes absolutely no responsibility for injuries and damages that may occur due to improper installation and handling.
Please remember that if you remove the mount from the wall/ceiling later, you will find the screw holes and anchor bolts for the
mounting unit left on the wall.
All PDR mounts and adapters carry a limited lifetime warranty from ship date against defects in material and workmanship.
We are not liable for improper installation that results in damage to mounts, adapters or presentation equipment.
Mounts by
A division of David Engineering & Mfg. Inc.
A
B
Parts Configuration Chart
5/16" x 2 1/2” Lag bolts …4 pcs D
(Note: used with the 5/16" Flat washers C).
C 5/16" Flat washers…4 pcs
! Simple to adjust no tools required
! Applications for wall or ceiling mounting
! Adjustable height from 2 1/2” to 12”
(adapter req. For additional height)
! Pitch + yaw adjustments and 360 deg.
rotation
! Quick projector removal with exclusive
“Bayonet locking system”
Features
Thank you for purchasing the PDR Projector mount with the exclusive “Bayonet locking system” (patent applied for)
Universal adapter plate assembly 1pc
SEE SHEET 3 FOR INSTRUCTIONS
Projector mount 1 pc
Safety lever
Locking thumb screw
Slide adjustment
Rotate 360 deg