PDR Mounts MDWM50 - Manual

Model
MDWM50 MONITOR DISPLAY WALL MOUNT
To ensure the correct usage, please read and follow the instruction manual thoroughly. Please store the instructions in a safe place for future reference.
1
Special techniques are necessary for installation of the panel display mount.
Manufacturer assumes absolutely no responsibility for injuries and damages that may occur due to improper installation and handling.
Projector wall mounting application fig 2
All PDR mounts and adapters carry a limited lifetime warranty from ship date against defects in material and workmanship.
We are not liable for improper installation that results in damage to mounts, adapters or presentation equipment.
Mounts by
A division of David Engineering & Mfg. Inc.
! Suitable for displays with 75mm &
100mm vesa hole pattern
! Simple to adjust no tools required
! Pitch and yaw adjustments, and 360
deg. rotation
! Quick monitor removal with exclusive
“Bayonet locking system”
Features
Thank you for purchasing the PDR monitor mount with the exclusive “Bayonet locking system” (patent applied for)
360 deg Rotation
To ensure customer safety, be sure to decide the installation location so that the strength is sufficient to
withstand the weight of both the monitor and the mount.
Fully tighten all of the mounting screws as specified in the instructions.
Quick disconnect lever
Mounting hardware
Wall anchors 4 pcs
Monitor mounting screw 4 pcs
Mounting plate