Understanding the drinkwell, Outdoor dog parts – Petsafe Drinkwell® Outdoor Dog Fountain User Manual
Page 13
www.petsafe.net
13
Reservoirs
Housing
Reservoir
Caps
Bowl
Pre-Filters
Charcoal
Filter
Foam
Filter
Housing
Lid
T-Tube
Outflow
Tube
Pump
UNDERSTANDING THE DRINKWELL
®
OUTDOOR DOG PARTS
Bowl: the bowl is the foundation of the fountain and provides a large drinking area for pets. The bowl
features cutouts on the sides to help carry and place the fountain.
Housing/Filter Housing: the water is pumped up through the housing to cycle through a charcoal
filter and out the spout to create a free-falling stream of water for pets to drink from.
Housing Lid: snaps on to the back of the housing and encloses the filter.
Pre-Filters: this fountain features two plastic pre-filters that are small intake grates that will catch
large particles, such as hair and food, before they reach the pump and foam filter. The pre-filters can
easily be removed and rinsed off while the fountain is running.
Charcoal Filter: is a replaceable 3-layer charcoal filter with granulated carbon made from coconut
shells. The charcoal filter absorbs bad tastes and odors as the water passes through the filter and helps
keep the water tasting fresh and appealing to pets. The duo-density polyester pad helps catch hair and
debris to keep the water cleaner.
Foam Filter: is intended to catch large debris, hair and food left in the water before it reaches the
pump. Improves the overall cleanliness of the water and the pump in between cleanings.
T-Tube: connects with the Outflow Tube and directs water from the pump into the housing, to be
filtered and pour out into a free-falling stream.
1)
2)
3)
4)
5)
6)
7)
Adaptor