Cobra Electronics CB 29 LTD BT - Manual (Page 4)

Installation Installation
Location
3 2
Mounting and
Connection Mounting and Connection
Hold the radio with the mounting bracket
in the exact desired location. If there is no
interference, remove the bracket and use
it as a template to mark the location for
the mounting screws.
Location
Plan location of transceiver and microphone
bracket before starting the installation.
Select a location that is convenient for operation,
yet does not interfere with the driver or passenger.
The transceiver is usually mounted to the
underside of the dash with the microphone
bracket beside it.
Note
The transceiver is held in
the universal mounting bracket
by two thumbscrews which
allow for adjustment at a
convenient angle.
The bracket includes two
self-tapping screws and star
washers. The mounting must
be mechanically strong,
conveniently located.
continued
Drill the holes and secure the bracket. 2
1
Connect the antenna cable plug to the
receptacle marked “ANT” on the back
of the unit. 3