Cool Gear USBG-7DU2S - Manual (Page 3)

7-Port USB2.0 Metal Hub with DIN RAIL Mounting Kit
3
end connector to this hub. Since the USB hub is
plug-and-play, you don’t have to turn off your host
computer when installing the hub.
Note:
In some cases, you will see an error message said
that the USB Hub caused the USB bus power over the current limit,
please ignore this message since the hub is hot plug and its power
capacitor will cause a very short period of current. It will NOT affect
your USB function.
4. Connect the USB devices to the downstream ports of this
hub.
5. Mount your hub on the wall or DIN RAIL if required.