Curtis 2200R - Manual (Page 7)

Operating Current
Total system current is a function of the voltage,
sender type, display mode, and the gage’s factory
programming. Typical operating currents (not
including the current to drive the sender) vary from 16-55 mA,
for 12V models, depending on model number. For 24V models,
typical operating currents (not including the current to drive the
sender) vary from 18-45 mA, depending on model number.
Variable Parameters
The following parameters are set in the factory as part of the
gage’s programming. Contact Curtis for additional information
on your specified model number.
Sender input: Variable resistance
Variable voltage
Variable current
Display mode
Single LED pointer*
Rising bar graph
Transition points for each of the 10 LEDs
(Used to customize display for OEM applications)
* indicates standard setting
!
6