COBY electronic TV-DVD1260 - Manual (Page 21)

21
TV SETUP
Enter TV Setup mode to adjust the various internal settings of the Television.
Using the Remote:
Press TV SETUP to enter TV Setup mode.
Use the DIRECTION buttons to select a desired
item.
Press OK to confirm a selection.
If necessary, you may use the numeric
keypad to input data and then press OK to
confirm.
Press DVD SETUP to exit Setup mode (or select
EXIT and press OK).
Using the Main Unit buttons:
Press MENU to enter TV Setup mode.
To select a desired item:
Press VOL - to move the selection left; press VOL + to move the selection right.
Press CH - to move the selection down; press CH + to move the selection up.
Press OK to confirm a selection.
Press MENU to exit Setup mode (or select EXIT and press OK).
Picture Setup
Use the DIRECTION buttons to highlight the desired picture selection and press OK to confirm.
Item Description
Contrast Adjust the screen’s contrast.
Bright Adjust the screen’s brightness.
Color Adjust the screen’s color saturation.
Tint Adjust the screen’s tint.
Sharpness Adjust the screen’s sharpness.
P.Lock (Parental Lock/V-Chip) Setup
Use the DIRECTION buttons to highlight the desired P.Lock selection and press OK to confirm.
The P.LOCK options control the built-in V-Chip feature of this television. TV broadcasts include a
signal that classifies the contents of the program. When this feature is activated, the TV will detect
this signal and block any programs that are rated higher than what you have set.
1.
2.
3.
•
4.
1.
2.
•
•
3.
4.