Composite / s-video & stereo audio connections, S-video connector – CyberHome Entertainment Cyber Home CH-DVD500 User Manual
Page 13
VIDEO
VIDEO
S-VIDEO
OUT
VIDEO
VIDEO
Y
Pb
Pr
VIDEO
OUT
R
L
AUDIO
AUDIO
ANALOG OUTPUT
Connecting to a TV with S-Video In and Stereo Audio In
If your TV has an S-Video Input, it’s recommended that you use this connection. S-Video separates brightness and
color signals, resulting in higher video quality than Standard Composite Video.
You must purchase a separate S-Video Cable for this connection (not included).
Connect the S-Video Out from the DVD Player to the S-Video In of your TV.
If you are not using a separate receiver for audio, connect the Stereo Audio outputs (Red - Red, White - White) of
the DVD Player to the corresponding Inputs of your TV
Connect the Power Cord to the DVD Player and AC Power Outlet.
Turn on the TV and DVD Player (power switch on back) and select the S-Video Input on your TV. On some
models, this may be called “Input 2” or “Video 2”. You should now see the DVD Player’s splash screen on your TV.
Change the OUTPUT Setting in the DVD Player’s Setup Menu to S-VIDEO. (See pg 31)
Change the ANALOG Setting in the DVD Player’s Setup Menu to 2CH. (See pg 32)
S-Video Connector
Typical Connection - Connecting to a TV with Composite Video In and Stereo Audio In
If your TV has only a single Video Input jack, typically a yellow-colored plug, you will use the Composite Video output
of the DVD Player for the Video Connection. We’ll also assume your TV has Red and White Stereo Audio In
connectors. You will use these for the Audio Connection.
Use the included Video Cable (Yellow) to connect the Video Out of the DVD Player to the Video In of your TV.
Connect the Stereo Audio outputs (Red-Red, White-White) of the DVD Player to the matching Inputs of your TV.
Connect the Power Cord to the DVD Player and AC Power Outlet.
Turn on the TV and DVD Player (power switch on back) and select the Video Input on your TV. On some models,
this may be called “Input 1” or “Aux In”. You should now see the DVD Player’s splash screen on your TV.
Change the ANALOG Setting in the DVD Player’s Setup Menu to 2CH. (See pg 32)
TV
VIDEO
IN
STEREO AUDIO IN
R
(RED)
L
(WHITE)
DVD
R
L
1
Composite / S-Video & Stereo Audio Connections
2
VIDEO
VIDEO
VIDEO
VIDEO
VIDEO
VIDEO
S-VIDEO
OUT
VIDEO
VIDEO
Y
Pb
Pr
R
L
AUDIO
AUDIO
ANALOG OUTPUT
TV
STEREO AUDIO IN
R
(RED)
L
(WHITE)
R
L
S-VIDEO
IN
DVD
13