Ryobi AG402 - Manual (Page 7)

7 - English
FEATURES
PRODUCT SPECIFICATIONS
Wheel Size ............................................................. 4 1/2 in.
Cord Length ...............................................................10 ft.
Arbor Size ................................................ 5/8 in. x 11 UNC No Load Speed .................................. 11,000 r/min. (RPM)
Input ............................... 120 V, 60 Hz, AC only, 4.4 Amps
Net Weight .............................................................. 4.1 lbs.
KNOW yOUR ANgLE gRINDER
See Figure 1, page 11.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
SIDE HANDLE
The side handle can be installed on the left or right side of
the grinder, depending on operator preference, for stabili-
zation and must be used during all operations. In addition
to maintaining safe control during use, the side handle also
provides convenient ease of operation for the operator.
SPINDLE LOCK
The spindle lock keeps the spindle from turning while install-
ing and removing wheels and disks.
WRENCH STORAgE
The wrench can be easily stored in the side handle when
not in use.
ASSEMBLy
UNPACKINg
This product requires assembly.

Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
WARNINg:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKINg LIST
Angle Grinder
Wrench
Disc Flange
Flange Nut
Side Handle
Grinding Wheel
Operator’s Manual
WARNINg:
If any parts are damaged or missing do not operate
this tool until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNINg:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.