Ryobi OP400 - Manual (Page 5)

5 — English
UNPACKING
This product has been shipped completely assembled.

Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-860-4050 for assistance.
PACKING LIST
Charger
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
FEATURES
ASSEMBLY
PRODUCT SPECIFICATIONS
Charger Voltage ......................................................................................................................................................40 Volt DC
Charger Input........................................................................................................................................ 120 V, 60 Hz, AC only
Charge ..............................................................................................................................................approximately 1.5 hours
NOTE: Charge time is dependent on battery pack.
KNOW YOUR CHARGER
See Figure 1, page 8.
The safe use of this product requires an understanding of the
information on the tool and in this operator’s manual. Before
use of this product, familiarize yourself with all operating
features and safety rules.
DIAGNOSTIC FEEDBACK
LEDs provide feedback to indicate whether the battery pack
is charging, fully charged, or defective.
KEY HOLE HANGER
The charger has a key hole hanging feature for convenient,
space saving storage. Screws should be installed so that
the center distance is 4-7/8 in.