Ryobi BGH616 - Manual (Page 10)

10
adjuStable WrenCH
Fig. 3
Combination WrenCH (3)
7 mm, 10 mm, and 12 mm
PHilliPS SCreWdriVer
The following tools (not included) are needed for checking adjustments of your saw or for installing the blade:
TOOLS NEEDED
LOOSE PARTS
The following items are included with your Bench Grinder:

Shield Bracket – one left, one right ............................. 
 Safety Shield Assemblies - left (magnified), right ........ 
 Work Rest, grooved (left and right) .............................. 
 Work Rest Brackets ..................................................... 
 Fastening Knobs ( large,  medium, and  small) ..... 6
 Washers (6 mm) ........................................................... 4
 Washers (5 mm) ........................................................... 
 Lock Washers (6 mm) .................................................. 
 Wheel Dresser Tool (Model BGH87 only) .................. 1
 Operator’s Manual
WARNING: The use of attachments or accessories not listed might be hazardous and could cause serious
personal injury.
WorK reSt
(riGHt)
WorK reSt,
GrooVed (leFt)
SaFetY
SHield Knob
WorK
reSt Knob
WorK reSt
braCKet (leFt)
SHield braCKet(leFt)
SHield braCKet (riGHt)
SaFetY SHield (riGHt)
SaFetY SHield (leFt)
loCK WaSHer WaSHer
Fig. 4
WHeel dreSSinG tool
(model bGH827 onlY)
WorK reSt
braCKet (riGHt)
rear SHield
braCKet Knob