Ryobi P201 - Manual (Page 7)

7 — English
FEATURES
ASSEMBLY
UNPAcKINg
This product has been shipped completely assembled.

Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PAcKINg LIST
Drill-Driver
Bits (2)
Magnetic Bit Holder
Operator’s Manual
WARNINg:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Failure to heed this
warning could result in serious personal injury.
WARNINg:
Do not attempt to modify this product or create
accessories not recommended for use with this product.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible serious
personal injury.
WARNINg:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
TWO-SPEED gEAR TRAIN
The two-speed gear train is designed for drilling or driving
at
LOW (1) or hIgh (2) speeds. A slide switch is located
on top of your drill for selecting either LOW (1) or hIgh (2)
speed.
vARIABLE SPEED
The variable speed switch trigger delivers higher speed
with increased trigger pressure and lower speed with
decreased trigger pressure.
OPERATION
WARNINg:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNINg:
Always wear safety goggles or safety glasses with side
shields when operating power tools. Failure to do so could
result in objects being thrown into your eyes, resulting in
possible serious injury.
WARNINg:
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.
APPLIcATIONS
You may use this product for the purposes listed below:

Drilling in wood
 Drilling in ceramics, plastics, fiberglass, and laminates
 Drilling in metals