Ryobi P240 - Manual (Page 7)

7 – English
FEATURES
PRODUCT SPECIFICATIONS
Chuck ...........................................................3/8 in. Keyless
Motor ......................................................................18 V DC
Switch ..........................................................Variable Speed No Load Speed ..................................0-1,000 r/min. (RPM)
Torque ................................................................... 130 in.lb.
KNOW YOUR DRILL-DRIVER
See Figure 1, page 12.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
BIT STORAGE
When not in use, bits provided with your drill-driver can be
placed in the storage area located on the base of the motor
housing.
FORWARD/REVERSE SELECTOR
(DIRECTION OF ROTATION SELECTOR)
Your drill-driver has a forward/reverse selector located above
the switch trigger. Setting the direction of rotation selector
in the
OFF (center lock) position helps reduce the possibility
of accidental starting when not in use.
KEYLESS CHUCK
Your drill-driver has a keyless chuck that allows you to hand
tighten or release drill bit in the chuck jaws.
RIGHT ANGLE DESIGN
The drill-driver’s right angle head design allows you to get
into tight work areas for drilling and driving.
SWIVELING BATTERY FOOT
The drill-driver’s swiveling battery foot design positions the
battery pack in the most convenient location.
VARIABLE SPEED SWITCH TRIGGER
The variable speed switch trigger on your drill-driver deliv-
ers higher speed with increased trigger pressure. Speed is
controlled by the amount of switch trigger depression.