Ryobi HG500QP - Manual (Page 8)

8 - English
FEATURES
PRODUCT SPECIFICATIONS
Heat Output ........................................................................................................................................................ 200˚F-1050˚F
Input ..................................................................................................................................... 120 V, 60 Hz, AC only, 11 Amps
Net Weight ....................................................................................................................................................................1.9 lbs.
KNOW YOUR HEAT GUN
See Figure 1, page 12
The safe use of this product requires an understanding of
the information on the product and in this operator’s manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
HANGER
A hanger is located in the support stand of your heat gun.
LED TEMPERATURE DISPLAY
LED lights located on top of the heat gun display the desired
temperature as indicated by the position of the temperature
adjustment dial.
NOSE CONE
The nose cone on your heat gun can be removed for work
in confined spaces.
ON/OFF SWITCH
Your heat gun has a conveniently located on/off slide
switch.
POWER CORD
An extra-long power cord gives you more freedom of move-
ment and placement flexibility when working with your heat
gun.
SUPPORT STAND
Your heat gun has a built-in support stand for ease of use
and convenient cool down.
TEMPERATURE ADJUSTMENT DIAL
The temperature of your heat gun can be adjusted from
200ºF to 1050ºF by rotating the temperature adjustment dial.
ASSEMBLY
UNPACKING
This product has been shipped completely assembled.

Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Heat Gun
Operator’s Manual
WARNING:
If any parts are missing do not operate this tool until
the missing parts are replaced. Use of this product with
damaged or missing parts could result in serious per-
sonal injury.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.