Creda W120VW - Manual (Page 7)

Wash dial and symbols
Variable spin speed control dial
(Model W120VW only)
Before selecting a programme, ensure the mains button is in the ‘OFF’ position.
Turn the dial slowly clockwise. You will hear as the pointer aligns with the start of the selected wash programme, final rinse or spin.
Note: Failure to correctly align the pointer to the start of a wash programme will result in detergent not being dispensed from the drawer.
7
To reduce the maximum spin speed for the selected programme, turn the dial before or during a programme.
Note: Spin speed cannot be increased again whilst the appliance is spinning.
Long Spin
Pointer
End of Programme
Short Spin
Start of Wash, Final Rinse & Spin Programmes
Rinses
Letters represent selected programme
Spin only option
Before selecting a programme, ensure the mains button is in the ‘OFF’ position.
To select long spin, turn the wash dial clockwise until the pointer aligns with
For a short spin align the pointer to
Press the mains button ‘ON’.