Satellite Liberty - Manual (Page 9)

PN 18041-REV C page 9
Install Front Assembly Install the Decal Install Inside Door Handle
Install (2) L brackets on front side
of front assembly in door jamb.
Install #68 rivet STNLS PN 11270
from bottom of floor through L
bracket and set rivet. Install #68
STNLS rivet PN 11270 through
door jamb from inside through L
bracket and set rivet. Center of decal should be at 60"
high. Tip: Top of the decal should
line up with 2
nd corner rivet from
top.
Install (2) Avdel black rivet PN
17030 though handle PN 16807,
into holes on inside of door and set
rivet.
Install Outside Door Handle
With 2 rivets #612 alum. PN 10812 through
handle PN 16807. Into holes on outside of
door & 2 washers PN 11315 on inside of
door.