US Balance US-STEALTH 500g x 0.1g - Manual (Page 2)

RETURN TO ZERO
After weighing an item, if the display does not read “0.0” press the ZERO/TARE button
to return to “0.0” and you are ready to weigh again.
CHANGE WEIGHING MODES
Press the “CAL/MODE” button to change weighing modes on your scale. This scale has
4 weighing modes: g, oz, gn, dwt.
CALIBRATION
With the scale turned on and placed on a stable surface, press and hold the CAL/MODE
button. The display will show “CAL”, press and release CAL button again and “100.0”
will flash in the display, immediately place a total of 100g weight on the scale. The scale
will reset itself and will give you a PASS message. Calibration is complete.
OPERATING ENVIRONMENT
The optimum operating temperature for the scale is 50-86° F/10-30°C. Rough handling of
the scale will damage the internal sensor; so you must avoid actions such as shaking or
dropping the scale. This is a sensitive piece of electronic equipment and will be affected
by things such as moisture, extreme temperature changes, magnetic fields, careless
handling and misuse.
AUTOMATIC SHUT-OFF
The scale will automatically shut-off after 60 seconds of inactivity this is to help conserve
the battery power. We recommend good quality AAA batteries.
Tested to comply with FCC standards.