Casio XJ-M245 - Manual (Page 17)

17
5.
Click the button to start playback.
z This will display a control panel at the top of the screen.
z During file playback, you can use the control panel buttons to perform the operations
described below.
ArcSoft MediaConverter 3 for CASIO Projector is computer software that converts an MP4, MOV * ,
AVI, or WMV format file to a Motion JPEG format AVI file that can be played by the projector’s Viewer
function. For details about file formats, see page 5.
* QuickTime Player 7 or greater is required to convert from a MOV file.
Important!
In order to perform the procedures in this section, you will first need to install ArcSoft
MediaConverter 3 for CASIO Projector from the CD-ROM that comes with the Data Projector
onto your computer. For more information, see “Installing the Software” (page 8).
To do this: Perform this operation:
Go to the previous page Click the button.
Go to the next page Click the button.
Jump to a specific page 1. Click the button and then click “Slide Viewer” on the menu that appears.
2. On the page menu that appears, click the thumbnail of the destination page
and then click [OK].
Display help Click the button and then click “Help” on the menu that appears.
Exit file playback Click the button, or click the button and then click “Exit” on the menu
that appears. You could also press the [ESC] button on your computer keyboard
to stop playback.
Using ArcSoft MediaConverter 3 for CASIO Projector
Control panel