Waterworks Julia Handshower On Hook with White Porcelain Handle User Manual

Installation guidelines, Julia handshower on hook

Advertising
background image

Installation Guidelines

W A T E R W O R K S

Waterworks is a registered trademark of Waterworks Inc.

10.06.06

Julia Handshower on Hook

These guidelines have been prepared for the professional contractor to aid in the installation of:

JULIA HANDSHOWER ON HOOK (JUHS11-K, JUHS12-K, JUHS13-K) All dimensions

are based on original specification and are subject to change and variation. Please consult your Design
Associate for current specifications.

IMPORTANT

To ensure this product is installed properly, you

must read and follow these guidelines.

The owner/user of this product must keep this

information for future reference.

Be sure your installation conforms to local codes.

A wall valve or diverter valve (sold separately)

controls on/off/volume and must be installed for
proper operation of this product.

This product must be installed by a professional

contractor.

Refer to the specification and assembly drawings

attached. This product is sold partially assembled
but shown fully disassembled for illustrative and
service purposes only.

Inspect this product to assure you have all parts

required for proper installation.

Use only a strap wrench or protected/smooth-jaw

wrench on any finished surface

ROUGH IN:

1. Install a wall valve or diverter valve(sold separately)

at the desired location.

2. Finish the rough in by installing a well supported 1/2"

female IPS elbow.

3. Determine the ideal location of the hook assembly

based on the clients preference and install wood
blocking or position over a stud to properly secure

the hook.

HOOK AND ELBOW INSTALLATION:

4. The inlet elbow (2) is

1

2

" female IPS; install the

elbow using a nipple of appropriate length.

5. Drill holes to accommodate the screw anchors (5e)

and mounting screws (5c).

6. Loosen the 2.5 mm set screw (5a) and pull the

hook (5) off of the mounting bracket (5d).

7. Slide the escutcheon (5b) from the mounting

bracket.

8. Secure the mounting bracket (5d) to the wall using

the anchors (5e) and screws (5c) provided.

9. Reattach the escutcheon and hook.

10. Install the hand shower onto the conical end(4b)

of the hose

If further assistance is required, please contact Product

Support at 1-800-927-2120 (8am-7pm EST).

4

1

2

"

2

3

4

2

1

4

2

1

4

JUHS11-K (metal handle)

JUHS12-K (white porcelain handle)

JUHS13-K (black porcelain handle-MTO)

Advertising
This manual is related to the following products: