Waterworks .25 Deck Mounted Low Profile Concealed Tub Filler with Handshower and Metal Lever Handles - Manual (Page 2)

.25 ® Concealed Tub Filler With Lever Handle
1/05
W A T E R W O R K S ®
These guidelines have been prepared for the professional contractor to aid in the installation of:
.25 CONCEALED TUB FILLER WITH LEVER HANDLE (PTTU44-K)
All dimensions are based on original specifications and are subject to change and variation.
Please consult your Design Associate for current specifications.
Installation Guidelines
2
TUB FILLER INSTALLATION:
9. Unthread and remove the tee, spout mounting nut, metal
washer, and rubber gasket from the spout.
10. Insert the spout assembly through the spout hole of the
mounting surface, reinstall the rubber and metal spout
washers then tighten the spout mounting nut to secure the
spout to the mounting surface.
11. Reinstall the tee onto the spout shank then thread each
supply hose into the tee.
12. Connect each of the supply hoses to the adjacent side
valve making sure the hoses are not pinched/kinked.
INSPECT THE INSTALLATION:
13. Remove the aerator assembly from the spout using the
tool provided. Carefully open the hot and cold valves to
flush out any debris in the supply lines.
14. Inspect all connections for leaks.
15. To service a valve stem (7), loosen then remove the
handle assembly (1).
➢ If further assistance is required, please contact Product
Support at 1-800-927-2120 (8am-7pm EST)