Waterworks 25 Rectangular Single Wall Mounted Corian Lavatory Sink 26" x 18 1/2 - Manual

Modern Single Wall Mounted Lavator y
9/06
W A T E R W O R K S ®
These guidelines have been prepared for the professional contractor to aid in the installation of:
MODERN SINGLE WALL MOUNTED LAVATORY (PTLV25)
All dimensions are based on original specifications and are subject to change and variation.
Please consult your Design Associate for current specifications.
Installation Guidelines
1
► Inspect this product to assure you have all parts
required for proper installation.
► Do NOT use putty during this installation.
ROUGH IN:
IMPORTANT: 2x6 blocking to secure the sink to the wall
is mandatory.
1. Install 2x6 blocking in the wall at the proper locations to
make sure the 4 mounting bolts can be threaded into
the blocking.
2. Using the template provided, mark and drill 4 holes for
securing the 2 Corian
®
mounting brackets.
3. Place the Corian
®
mounting brackets against the wall
then secure them to the wall using the 4 lag screws
provided.
4. Verify that the brackets are level and plumb; readjust or
shim(not included) if necessary.
5. Attach an aluminum rail to each Corian ®
mounting
bracket using the 4 machine bolts provided.
6. Verify that the rails are level and plumb; readjust as
required.
7. Dry fit the sink onto the brackets and verify that the sink
is level and supported.
8. Install the drain and faucet. Note that the overflow
assembly must be installed onto the flange prior to
tightening the drain body up against the overflow collar.
9. Remove the sink and apply silicone to the top and front
surfaces of the bracket.
10. Place the sink onto the brackets while making sure the
silicone does not get wiped off as the sink is being
installed.
11. Verify that the sink is stable, level and plumb; readjust or
shim as required.
► If further assistance is required, please contact Product
Support at 1-800-927-2120 (8am-7pm EST)
26"
9"
4 1 /
2
"
12" 18 1 /
2
"
2 1 / 4 "
18"
4"
18 1 / 2 "
19 1 /
2
"
34"
1 1 /
2
"
22 1 / 2 "
14 1 /
2
"
10 1 /
4
"
18"
Finished Floor
Finished Wall
PTLV25
IMPORTANT:
►
Blocking in the wall to secure sink is mandatory.
►
To ensure this product is installed properly, you must
read and follow these guidelines.
►
The owner/user of the sink must keep this information
for future reference.
► Be sure your installation conforms to local codes.
► Refer to the specification and assembly drawings
attached.