Canon eos rebel T2i - Manual (Page 90)

3 Auto Exposure BracketingN
90
Follow steps 1 and 2 to turn off the AEB amount display.
The AEB setting will be canceled automatically if the power switch is
set to <2>, flash recycling is complete, etc.
Using AEB with continuous shooting.
If <i> continuous shooting (p.70) has been set and you press the
shutter button completely, the three bracketed shots will be taken
continuously in this sequence: Standard exposure, decreased
exposure, and increased exposure.
Using AEB with <u> single shooting.
Press the shutter button three times to take the three bracketed
shots. The three bracketed shots will be exposed in the following
sequence: Standard exposure, decreased exposure, and increased
exposure.
Using AEB with exposure compensation.
Centering on the exposure compensation amount, AEB will be
applied.
Using AEB with the self-timer or wireless remote control.
With the self-timer or wireless remote control (<Q> or <l>), you
can take three continuous shots. With <q> set, the number of
continuous shots will be three times the number set (p.57).
Canceling AEB
Shooting Tips
Neither flash nor bulb exposures can be used with AEB.
If the [2 Auto Lighting Optimizer] (p.103) menu is set to other than
[Disable], the AEB’s effect might be minimal.
COP
Y