WEATHER GUARD Model 391-0-02 Super-Side Box, Aluminum, 15.2 cu ft - Manual

BOLT KIT
Bolt Kit #32-0027 is provided with
Models 246 thru 265. Check this
bolt kit to be sure the following
parts are included:
Quan. Description
8 5/16" Lock Washer
14 5/16" Flat Washer
4 5/16-18 Blind Fastener
1 Installation Tool
1 5/16-18 x 2-1/4" Bolt,
black oxide
1 1-3/4" Round Cap Plug
4 5/16-18 x 1-1/4" Hex Bolt
4 5/16-18 x 1" Hex Bolt
10 5/16-18 Nylon Lock Nut
2 "J" Bolt
2 Plastic Retaining Washer
2 Fender Washer
Bolt Kit #32-0028 is provided with
Models 272 thru 297. Check this
bolt kit to be sure the following
parts are included:
Quan. Description
8 5/16" Lock Washer
14 5/16" Flat Washer
4 5/16-18 Blind Fastener
1 Installation Tool
1 5/16-18 x 2-1/4" Bolt,
black oxide
1 1-3/4" Round Cap Plug
4 5/16-18 x 1-1/4" Hex Bolt
4 5/16-18 x 1" Hex Bolt
12 5/16-18 Nylon Lock Nut
4 "J" Bolt
4 Plastic Retaining Washer
4 Fender Washer
INSTALLATION INSTRUCTIONS
Hi-Side and Super Side Boxes - Models 246 through 297
TOOLS REQUIRED
• 1/2" Open or Box End Wrench (2)
• Ratchet Wrench
w/ 1/2" deep well socket
• Electric Drill
• 1/2" & 3/8" Drill Bits
• Carpenters Square
• Utility Knife or Scissors
• Tape
• 9/16" Open or Box End Wrench
WARNING
This product can reduce the driver's ability to clearly see road-
ways, vehicular or pedestrian traffic and other objects through the
rear and side windows of the vehicle, which may cause an acci-
dent. Extra precautions should be taken when driving a vehicle
with this product. Make all adjustments necessary to ensure max-
imum visibility, including but not limited to, changing mirror and
seating positions. State and local laws may prohibit obstruction
of windows in a moving vehicle.
DANGER
Danger of explosion. Do not use this product for storing or trans-
porting flammables, explosives, hazardous materials, or hazardous
waste, such as containers of gasoline, solvents, gun powder,
dynamite, propane tanks, acetylene tanks and cutting torches.
This product is only intended and safe for use in storing and trans-
porting small tools, equipment and other similar materials. Any
modifications made to, or unintended use of this product, could
create a hazardous condition that can cause death, serious
personal injury or property damage.
Figure 1. Typical Installation
Rev. H 1/01 Part No. 24-0029
IMPORTANT
BEFORE YOU BEGIN
Read these instructions and
warnings completely before
installation.
PARTS LIST
• 1 - Hi-Side (or Super Side) Box
• 2 - Legs
• 2 - Mounting Pads
(20" and/or 27" and/or 45")
Approximate Installation Time:
42 min. per unit (0.7 hrs.) Depending on truck equipment installation experience