WEATHER GUARD Model 8316-3 CATV Cabinet, 4 Shelf, 21 in x 20 in x 14 in - Manual

1
LOCKABLE CABINET
Models 8310-3 • 8311-3 • 8312-3
CATV BOX
Models 8313-3 • 8316-3
ATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS
BEFORE ASSEMBLING, INSTALLING OR USING THIS PRODUCT.
WWW.WEATHERGUARD.COM
VAN STORAGE SOLUTIONS
INSTALLATION TIME
Approximate installation time: 12-24 min. per unit (0.2 - 0.4 hrs.) depending on van equipment installation experience.
FOR THE WAY YOU WORK™
Part No. 24-0060 Rev C 11/11 (ECN 5026)
8310-3
8311-3
8312-3
8313-3 8316-3 Description
1 1 1 Cabinet
1 1 0 Locking Handle Kit
0 0 1 Handle kit w/ 2 10-24 x 3/8" Screws
0 0 5 Rubber Pad, 1/8" x 12-11/16" x 19-13/16"
0 2 0 Rubber Pad, 1/4" x 2" x 16"
0 4 0 Rubber Pad, w/ adhesive 1/4" x 12" x 16"
2 2 0 Foam Pad w/ adhesive
2 2 2 Keys
0 1 0 Hole Bushing
PARTS LIST
INSTALLATION MANUAL
DANGER
WARNING
CAUTION
Danger of explosion. Do not use this product for stor ing or transporting flammables, exp losives, hazardous materials, or hazardous waste, such as
containers of gasoline, solvents, gun powder, dynamite, propane tanks, acetylene tanks and cutting torches. Failure to heed this warning will result
in death or serious injury.
This product is only intended and safe for use in storing and transporting small tools, equipment and other similar materials. These instructions are
to be followed using the parts and fasteners supplied for proper installation. Any modifications or improper installation of this product will create a
hazardous condition that could result in death, serious personal injury and/or property damage.
All floor mounting bolts near the fuel tank area should be installed from the underside of the vehicle, to guard against the fuel tank being punctured in
the event of a collision. This would mean not using Blind Fasteners in this area. Holes in this area should be 5/16". Ensure ample space in roof ribs
and sidewall ribs for mounting screws so as not to puncture exterior roof or wall.
Do not install this product where it could interfere with deployment of air bags. Failure to comply could result in death or serious body injury.
– NOTICE –
Any modification or unintended use of this product shall immediately void all manufacturers warranties. Manufacturer disclaims all liability for injuries
to persons or property resulting from any modification to, or unintended use of this product.
Prior to drilling, so as not to cut electric wires, fuel lines, brake lines, etc., check behind and underneath drilling and mounting locations. To keep debris
out of your eyes when checking the underside of the vehicle, or when drilling, always wear protective eye wear. Failure to heed this warning will result
in death or serious injury.
*24-0060*