WEATHER GUARD Model 9036-3 Strong Box, 18-1/2 in x 19-1/2 in x 36-3/4 in - Manual

INSTALLATION INSTRUCTIONS
Model 9036 Strong Box
IMPORTANT
BEFORE YOU BEGIN
Read these instructions and
warnings completely before
installation.
BOLT KIT
Bolt Kit #32-0167 is provided with
your strong box. Check this bolt kit
to be sure the following parts are
included:
Quan. Description
4 5/16-18 x 1-1/2" Hex Hd. Bolt
1 5/16-18 Nylon Lock Nut
5 5/16" Flat Washer
4 5/16-18 Blind Fastener
1 5/16-18 x 2-1/4" Blk. Ox. Bolt
4 5/16" Lock Washer
1 Installation Tool
TOOLS REQUIRED
•
Electric Drill
•
3/16", 3/8" & 1/2" Drill Bits
•
1/2" Open or Box End Wrench
•
9/16" Open or Box End Wrench
Part No. 24-9036 REV. F ECN 5315 05/13
DANGER
Danger of explosion. Do not use this product for storing or trans-
porting flammables, explosives, hazardous materials, or hazardous
waste, such as containers of gasoline, solvents, gun powder, dyna-
mite, propane tanks, acetylene tanks, cutting torches and gas pow-
ered equipment. This product is only intended and safe for use in
storing and transporting small tools, equipment and other similar
materials. Any modifications made to, or unintended use of this
product, could create a hazardous condition that can cause death,
serious personal injury or property damage.
1/2" Hole
5/16" Flat Washer
5/16" Lock Washer
5/16-18 x 1-1/2"
Hex Hd. Bolt
5/16-18 Blind Fastener
3/8" Hole
Approximate Installation time:
18 min. per unit (0.3 hrs.)
Depending on van equipment
installation experience.
WATCHMAN® IV
Lock System
1