Canon C75 - Manual (Page 190)

14-6 Summary of Settings Chapter 14
TX (Transmission) Settings Menu
For details on accessing the settings below,
→
pp. 14-2, 14-3.
Setting Description Sub-Settings
ECM TX Enables/disables Error Correction Mode (ECM)
during transmission.
ON
OFF
MID PAUSE SET Selects the length of the pause entered when you
press
R /Pause.
4 SEC *
( 1 to 15 )
AUTO REDIAL Enables/disables automatic redialling if the other
party's line is busy on the first attempt. (
→
p. 7-11)
ON
OFF
REDIAL TIMES Selects the number of redial attempts. 2 TIMES
( 1 to 10 )
REDIAL INTERVAL Selects the period of time between redial attempts. 2 MIN.
( 1 to 99 )
TIME OUT Enables/disables automatic scanning of
documents after the fax number is entered.
ON : Scanning begins automatically five seconds
after entering the fax number (10 seconds if
sending to multiple destinations).
OFF : Scanning does not start automatically. (You
need to press Start (Start/Scan) to begin
scanning.)
ON
OFF
COLOUR DIRECT TX
(MultiPASS C75/FAX-
B215C only)
Enables/disables sending of colour documents to
fax machines that do not have colour faxing
capability.
OFF : Colour documents cannot be sent to fax
machines that do not support colour faxing.
ON : Colour documents can be sent to fax
machines that do not support colour faxing. (The
document is converted to black & white.)
OFF
ON
(Default settings are shown in bold type.)
* The default setting for Ireland is 2 SEC.