WEATHER GUARD Model 233-3-01 Accessory Cross Member, Full-Size - Manual

1
Model 233-3 Accessory Center Crossmember
ATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS
BEFORE ASSEMBLING, INSTALLING OR USING THIS PRODUCT.
WWW.WEATHERGUARD.COM
VAN STORAGE SOLUTIONS
INSTALLATION TIME
Approximate installation time: 24 minutes per unit (0.4 hours) depending on van equipment installation experience .
FOR THE WAY YOU WORK ™
Part No. 24-0180 Rev B 10/11 (ECN 5026)
DESCRIPTION QTY.
5/16" Flat Washer 12
5/16-18 x 7/8" Carriage Bolt 10
5/16-18 Nylon Lock Nut 12
5/16-18 x 2" Carriage Bolt 2
1/4-20 x 1/2" Taptite Screw 2
BOLT KITS
Bolt Kit #32-0126 is provided with Model 233-3, check this bolt kit to be sure the following parts are included:
INSTALLATION MANUAL
WARNING
This product is only intended for, and only designed for, transporting ladders, lumber, pipe and other similar materials. It is the responsibility of the
user to secure these materials to the rack be fore transporting. Any modifications made to this product, or use of this product for any other purpose
than its intended use, could create a hazardous condition that can cause serious personal injury or property damage. Failure to comply could result
in death or serious body injury.
– NOTICE –
Any modification or unintended use of this product shall immediately void all manufacturers warranties. Manufacturer disclaims all liability for injuries
to persons or property resulting from any modification to, or unintended use of this product.
TOOLS REQUIRED
• Ruler
• 5/16" Nut Driver
• Ratchet Wrench
• 3" Socket Extension
• Loctite® thread locker
• 1/2" Socket (deep well preferred)
• 3/8" Socket
PARTS LIST
• 1- Crossmember
• 2- Center Stands
• 2- Center Stand Plates
• Bulk Cushion Strip
3/8 Flat W
asher
5/16 Flat W
asher
5/16-18
10-24
3/8-16
3/8-16 x 3/4
”
Thrd. Cutting
Bolt
10-24 x 2-3/4
”
Slotted Head
Screw
3/8-16 x 1-1/4
”
Carriage Bolt
3/8-16 x 1-1/2
”
Carriage Bolt
5/16-18 x 1
”
Carriage Bolt
5/16-18 x 2
”
Carriage Bolt
Bolt Chart
5/16-18 x 1-1/2
”
Carriage Bolt
5/16-18 x 1-1/4
”
Carriage Bolt
5/16-18 x 3/4
”
Carriage Bolt
5/16-18 x 2-1/4
”
Carriage Bolt
3/8 Flat W
asher
5/16 Flat W
asher
5/16-18
10-24
3/8-16
3/8-16 x 3/4
”
Thrd. Cutting
Bolt
10-24 x 2-3/4
”
Slotted Head
Screw
3/8-16 x 1-1/4
”
Carriage Bolt
3/8-16 x 1-1/2
”
Carriage Bolt
5/16-18 x 1
”
Carriage Bolt
5/16-18 x 2
”
Carriage Bolt
Bolt Chart
5/16-18 x 1-1/2
”
Carriage Bolt
5/16-18 x 1-1/4
”
Carriage Bolt
5/16-18 x 3/4
”
Carriage Bolt
5/16-18 x 2-1/4
”
Carriage Bolt
ThreadCutBolt,3/4".eps
*24-0180*