WEATHER GUARD Model 236-3-01 Quick Clamp Rack, Full-Size, Curb Side User Manual

Warning

Advertising
background image

234 / 236 PARTS LIST

• 2- Crossmembers

• 4- Ladder Guides (234)

• 2- Ladder Guides (236)

• 4- Top Adj. Clamp (234)

• 2- Top Adj. Clamp (236)

• 2- Bottom Adj. Angle (234)

• 1- Bottom Adj. Angle (236)

• 1- P.S. Rear Ass'y.

• 1- D.S. Rear Ass'y. (236)

• 1- D.S. Rear Ass'y. (234)

• 1- P.S. Front Ass'y.

• 1- D.S. Front Ass'y.

• 1- Airfoil

• 4- 8" Mtg. Clamps

• 2- 4" Mtg. Clamps

• 1- Bulk Cushion Strip

• 2- Center Support

• 2- Center Rails

ASSEMBLY AND INSTALLATION INSTRUCTIONS

Models 234 / 236

(Model 236, Curbside clamping only • Model 234, Streetside and Curbside clamping)

IMPORTANT

BEFORE YOU BEGIN

Read these instructions and

warnings completely before

assembly and installation.

WARNING

This product is only intended for, and only safe

for, transporting ladders, lumber, pipe and other

similar materials. It is the responsibility of the

user to secure these materials to the rack before

transporting. Any modifications made to this prod-

uct, or use of this product for any other purpose

than its intended use, could create a hazardous

condition that can cause serious personal injury

or property damage.

Rev.A 4/04

Part No. 24-0181

BOLT KIT

Bolt Kit #32-0159 with Model 236 and Bolt Kit

#32-0157 with Model 234. Check these bolt

kits to be sure the following parts are included:

32-0159 32-0157

Description

4

4

1/4-20 x 1/2" Taptite Screw

3

3

1/4-20 x 3/4" Hex Hd. Bolt

33

42

5/16" Flat Washer

4

6

5/16-18 x 1-1/4" Carriage Bolt

25

32

5/16-18 x 7/8" Carriage Bolt

33

42

5/16-18 x Nylon Lock Nut

3

3

1/4-20 Nylon Lock Nut

6

6

5/16-18 x 2" Carriage Bolt

TOOLS REQUIRED

• Ruler

• 3/8" Socket

• Ratchet Wrench

• 3" Socket Extension

• Loctite® thread locker

• Electric Drill w/ 5/16" & 3/8" drill bits

• 7/16" Open or Box End Wrench (2)

• 1/2" Socket (deep well preferred)

WARNING

These Ladder Racks were

not designed to fit Chrysler

mini vans. If installed on

these vehicles, the handle

can cause serious head

injuries or property damage.

Approximate Assembly and Installation time:

234: 1 hour 20 min. per unit (1.3 hrs.)

236: 1 hour 12 min. per unit (1.2 hrs.)

Depending on van equipment installation experience

The distinctive, trademarked

RED TIPS are your assurance of

WEATHER GUARD® Equipment

quality.

Advertising
This manual is related to the following products: