WEATHER GUARD Model 2510F Universal Roof-top Mounting Kit - Manual

© 2014 Werner Co. Part No. 24-0329 REV. A ECN 5469 07/14
 Before drilling for the blind fasteners, check for electrical wiring and air-bag system components.
 Use vehicle manufacturer’s provided mounting features when available.
 Follow vehicle manufacturer’s guidelines on roof loading and do not overload the roof of your vehicle.
INSTALLATION MANUAL
Universal Roof Mounting Kit
Model 2510F
ATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS
BEFORE ASSEMBLING, INSTALLING OR USING THIS PRODUCT.
PLAN YOUR VAN (TIPS FOR FASTER INSTALLATION)
SPACING GUIDELINES
 13mm socket and
driver  Flat-Blade
Screwdriver
 13mm wrench  Utility Knife
 Tape Measure  Marker
 Drill and 5/16” bit
“A” spacing is to the outside edges of the mounting feet before attaching the curved mounting plates.
In most applications the curved plates will face in to the center of the vehicle, but in some applications they will need to face
out. Vehicle dimensions are subject to change and may differ on your specific vehicle, verify fit before fully tightening fasteners.
TOOLS REQUIRED PARTS LIST
Mounting Foot (2)
Mounting Foot leveling plate (2)
Mounting foot bolt plate (2)
Curved mounting bracket (2)
M8 x 40mm Stainless steel mounting bolt (4)
M8 x 20 mm Stainless steel cap bolts (4)
M8 Stainless steel flat washers (4)
M8 Stainless steel lock nut (4)
VEHICLE “A” Spacing
Ford Transit Low-, Mid-, High-Roof 55-7/16 in
Ford Transit Connect 2014—front 46-1/8 in
Ford Transit Connect 2014—rear 47-1/8 in
Nissan NV200 45-5/16 in
Chevy City Express 45-5/16 in
Nissan NV Low Roof and High Roof 56-1/4 in