WEATHER GUARD Model 255 EZ-GLIDE® Drop Down Kit, Full, Driver Side - Manual (Page 8)

STEP 11
Place the Front Rotation Assembly on
top of the Cross-Member (A), place the
Ladder Stop (B) on top of the Lower
Rotation Tube, and install the
5/16-18 x (4-1/4" or 5")(Flat Hd. Screw).
Install 5/16-18 x 4" Hex Hd. Bolt through
Lower Rotation Tube and through the
Cross-Member. (B)
(A)
5/16-18 x (4-1/4" or 5")
Flat Hd. Screw
(3) 3/8" Flat
Washer
(2) 5/16-18 Nylon
Lock Nut
5/16-18 x 4"
Hex Hd. Bolt
STEP 12
After fastening Front Rotation Assem-
bly to Front Cross-Member, slide Cen-
ter Drive Tube(A) off of Rear Drive
Tube onto Front Drive Tube(B). Line up
mounting holes to match passenger
side holes.
(A)
(B)
8