Woo Audio WA3 Single-ended - Manual (Page 8)

©2011 WOO AUDIO tm Inc. All rights reserved. www.wooaudio.com Rev 1.0. June 10, 2011. 8
Installing the power cord:
Plug the power cord into the AC inlet. See ① in the below diagram. The AC inlet socket is a
standard IEC type. You will need to obtain the correct type for your region.
Installing the source input:
Plug the RCA interconnection cable into the RCA connectors; see
④
in the below diagram.
Back panel diagram:
① AC voltage selection switch
② AC inlet
③ RCA pre-amp output. This is an optional feature.
④ RCA input
U.S. European U.K.